| | |
|
| |
| | |
|
|
Oil Flo Solvent Cleaner
Price: From $12.20 to $152.00
Manufacturer: Titan Labs
Manufacturer Part No: 17012
Product Options
| |
|
|
Oil-Flo Safety Solvent Cleaner
Oil-Flo Safety Solvent Cleaner will remove numerous organic stains, marks, and residues from glass and other hard surfaces. Oil-Flo is a unique water-soluble liquid that dissolves various hard-to-clean materials including crayon marks, adhesive residue (from tape, stickers and solar film, for example), window caulk, graffiti, permanent marker, oily films, and lots more. (Please note that Oil-Flo will not remove mineral deposits.) Excellent for sticker removal and Holiday Paint from glass surfaces.
Non-volatile. A specialized product for removing organic stains such as asphalt, tar, oils, tree pitch, adhesive stickers, gum, candle wax, silicon caulk, roof tar, oil, etc. It is a versatile and effective cleaner that works especially great for removing graffiti. Oil Flo is safely used on glass, vinyl, concrete, metals, carpets, and clothing. Oil Flo is the proven answer to cleaning asphalt, spills, overspray, equipment, clothes, concrete and lots more.
Oil-Flo is water soluble and has slow evaporation. Once the contaminants are dissolved, they can be washed away cleanly with water leaving zero residue.
Oil-Flo is non-foaming, safe and very economical. Oil-Flo is especially useful in paving and roofing applications, construction site cleanup, rehabilitated plants and buildings, around industrial and power generating stations, after vandal attacks and for removing solar window film residue; plus many other special situations involving difficult cleanup. It is essential for every window cleaner and film installer. Available in Pints, Gallons, and Cases of 4 Gallons.
An amazingly effective solvent cleaner
Water soluble
Non-flammable (but is combustible)
Neutral pH, not acid nor caustic
Non-foaming
Comes ready to use or can be diluted
Economical; a little goes a long way
Slow evaporation, for longer dwell time
Contains no chlorinated solvents, benzene or CFC's
Retards crying, bleeding or running
Will not attack polymer coatings
Applications
Oil-Flo has been proven useful in many applications because of the exceptional cleaning ability, water-soluble feature, and relatively high safety. You can use it to clean concrete of oil stains, remove rubber marks, chewing gum, tree pitch and more from walls, walkways, vehicles, tools etc. Remove adhesive residue and pressure sensitive tape residue from many surfaces, black marks from baseboards or walls. Hundreds of other uses. Contact your distributor or Titan Laboratories for application information on other uses for Oil-Flo.
Window Cleaning Directions
Apply Oil-Flo full strength by wiping some on with a rag, or by spraying. Special 16-ounce solvent-resistant trigger spray bottles are available. Or you can use a garden-type sprayer, which must be made of brass or stainless steel. (Plastic garden sprayers will not withstand the dissolving power of Oil-Flo.) Never spray in windy conditions nor higher than shoulder level to prevent the mist from getting into your eyes (unless wearing face protection including goggles.) Use fine steel wool, synthetic steel wool, a white scrub pad, plastic scraper or something similar, to speed the removal.
Once the contaminant is dissolved, wash the window with a bucket and squeegee (or wipe off first with a rag.) The water and strip washer or brush will get dirty quickly, because of the solvent residue from the Oil-Flo and the residue from the graffiti, wax, adhesive or whatever you just cleaned.
If cleaning many very dirty windows, you may want to use two buckets of cleaning water. The first is the "dirty bucket" for the first cleaning, and the other is the "clean bucket" for the final washing. Sometimes you will want 2 strip washers or brushes also.
On some jobs, you can first apply Oil-Flo and then do a preliminary cleaning with a pressure washer or concentrated spray from a garden hose. The window can then be cleaned with a bucket and squeegee. We recommend Glass Gleam 3TM Window Cleaning Concentrate.
Window Film Removal Directions
Remove the old solar window film face material by peeling it off, scraping it, or by applying some Oil-Flo and waiting until it migrates through the surface and becomes removable. Be especially careful not to damage automobile rear windows which have heater wires on them. Sometimes a heat gun is useful.
Apply Oil-Flo full strength, or by mixing 50-50 with water in an open container such as a bucket If you mix with water, prepare only as much as you will use at once.
Apply the Oil-Flo to the adhesive residue (full strength or the water mixture) with a sponge. You can also carefully spray the liquid on the window. Wait 2 or 3 minutes. Then scrape the residue with a razor or scraper. (Except car windows with heater wires.) Some installers prefer to spray the window with a water-soap solution just before stripping it of the adhesive residue. Finally, check that you removed all residue and reapply if needed.
Coverage and Specifications
Coverage: A pint of Oil-Flo used full strength will cover 100 to 400 square feet or more, depending on conditions. (A gallon will cover approx. 800 to 3200 square feet)
Description: A clear water-soluble liquid. Slight solvent odor with pleasant fragrance. Proprietary blend of aromatic solvent base with emulsifiers, dispersants, surfactants, cleaning agents, performance enhancers, etc.
Active Ingredients:100% active, contains no water.
Flash Point: Over 130°F PMCC.
Autoignition Temperature: 900°F. Smokes when heated above 180°F.
Remove the old solar window film face material by peeling it off, scraping it, or by applying some Oil-Flo and waiting until it migrates through the surface and becomes removable. Be especially careful not to damage automobile rear windows which have heater wires on them. Sometimes a heat gun is useful.
Apply Oil-Flo full strength, or by mixing 50-50 with water in an open container such as a bucket If you mix with water, prepare only as much as you will use at once.
Apply the Oil-Flo to the adhesive residue (full strength or the water mixture) with a sponge. You can also carefully spray the liquid on the window. Wait 2 or 3 minutes. Then scrape the residue with a razor or scraper. (Except car windows with heater wires.) Some installers prefer to spray the window with a water-soap solution just before stripping it of the adhesive residue. Finally, check that you removed all residue and reapply if needed.
|
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
| | |
| Create and save your own shopping list or wish list.
To use this feature you must sign in as a registered user. | |
| | |
|
|
|