Tucker DI Tanks

Tucker Systems

Tap pressure water purification usually requires 40 to 50 psi coming in from the source. This enables the user to operate a single waterfed pole up to about 40 feet. If you are working above 40 feet or want to use 2 poles from a single system you will need a pump thats capable of pushing the proper volume to operate the waterfed poles properly.

Displaying products 1 - 6 of 6 results

Show:

Sort:

Tucker De-Ionized Tank

Price: $595.00

Quantity:

Tucker DeIonized System: Includes; 8" x 35" DI tank with mixed resin beads, head assembly, and a conductivity monitor. The DI System is safe, economical, easy to use and very portable. The DI process chemicaly removes calcium salts from hard water.

Tucker DI Cartridge System

Price: $475.00

Quantity:

Tucker De-ionized Cartridge System. Includes 4.5" x 20" DI cartridge with mixed bed resin, housing, head assembly, hand held TDS meter. Weighs only 10 lbs. Cartridges easy to change out.

Tucker TD1420 DI Cartridge

Price: $169.00

Quantity:

Tucker DI Replacement Cartridge for the DITD1420 De-Ionized Cartridge System. Easily exchanges your old DI cartridge. Cartridge dimensions; 4.5" x 20".

Tucker Quick Connects 1/4 Inch

Price: $7.70

Quantity:

1/4" Quick connects for the Tucker Pole System. Method C requires (two) 1/4" and (one) 3/4"

Tucker Quick Connect 3/4

Price: $8.65

Quantity:

3/4" Quick Connect for the Tucker Pole System. Method C requires (two) 1/4" and (one) 3/4". ASH models require (one) 3/4". Garden hose thread on one end, quick connect on opposite end.

TDIY Connector

Price: $25.00

Quantity:

Tucker Connector. Required for Tucker Pole C Models. Needed to connect To the DI System.