|
| | |
|
| |
| | |
|
|
DIY RODI KIT 1
|
Item Number: CWC-RODI-KIT-1
Manufacturer: Pure Water Power
Manufacturer Part No: CWC-RODI-KIT-1
|
|
Do It Yourself 4-Stage RODI Water Purification Kit
The Pure Water Power 4-stage DIY Tap pressure kit allows for spot free rinse using only regular tap pressure up to 50 ft. high and beyond. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0.
Pure Water Output
Tap Pressure Only @60 psi .90 gpm
@50 psi .75 gpm
This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change. This Pure Water Power RODI System produces .75 gpm minute at heights up to 50 ft with normal incoming pressure of 50 psi from the water source.
This System produces 45 gallons per hour and is capable of operating (1) Water fed pole with a 4 jet brush up to 50 ft. high assuming your incoming pressure is at least 45 psi. If you are in low pressure areas, a booster pump may be necessary to get proper water flow.
This kit is for those of you who prefer to implement the components needed for pure water cleaning into your vehicle without having to spend the money on a cart or rack. This systems includes all filters and housings and includes 1/2" tubing to connect all filters inline with push fitting easy release fittings. Just set it up and cut the hoses to length. Assembles easily.
Kit Includes:
* 40-Inch Stainless Steel RO Housing
* 10" x 4.5" DI Housing
* (2) 2.5" x 10" Carbon & Sediment Housings
* Sediment Filter
* CTO + long life Carbon Filter
* DI Filter
* HF5 Ultra High Flow 40" x 4" RO Membrane
* RO Housing Installation Clamps
* Flush Valve Assembly
* Hand Held TDS Meter
* 50 ft. 1/2 O.D. Tubing
|
|
|
ether-based resin. This means that the tubing will not degrade when exposed to water over time. Polyurethane tubing offers increased flexibility, and resistance to kinking. 1/2" O.D. Sold per ft
|
|
|
|
Product Reviews
| (9 Ratings, 0 Reviews) |
Average Rating:
|
|
| | |
| Create and save your own shopping list or wish list.
To use this feature you must sign in as a registered user. | |
| | |
|
|
|