|
| | |
|
| |
| | |
|
|
DIY RODI KIT 2
|
Item Number: CWC-RODI-KIT-2
Manufacturer: Pure Water Power
Manufacturer Part No: CWC-RODI-KIT-2
|
|
Do It Yourself 4-Stage RODI Water Purification Kit w/12 V Pump and Switch
The Pure Water Power 4-stage DIY 12 V kit allows for spot free rinse using only regular tap pressure up to 50 ft. high and beyond or with the pump on you can run 2 waterfed poles. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0.
Pure Water Output
Tap Pressure Only (Pump Off) (@ 60 psi: .9 gpm) (@ 50 psi: .75 gpm)
With Pump On plus tap pressure 2.1 gpm
Drawing from Buffer Tank: 1.8 gpm
This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change. This Pure Water Power RODI System produces .75 gpm minute at heights up to 50 ft with normal incoming pressure of 50 psi from the water source.
This kit is for those of you who prefer to implement the components needed for pure water cleaning into your vehicle without having to spend the money on a cart or rack. This systems includes all filters and housings and includes 1/2" tubing to connect all filters inline with push fitting easy release fittings. Just set it up and cut the hoses to length. Assembles easily.
Kit Includes:
* 40-Inch Stainless Steel RO Housing
* 10" x 4.5" DI Housing
* (2) 2.5" x 10" Carbon & Sediment Housings
* Sediment Filter
* CTO + long life Carbon Filter
* DI Filter
* HF5 Ultra High Flow 40" x 4" RO Membrane
* RO Housing Installation Clamps
* Flush Valve Assembly
* Hand Held TDS Meter
* 50 ft. 1/2 O.D. Tubing
* 12 V 5.3 gpm pump with wire leads and elbow fittings
* 12 V HD Water Proof 30 amp switch
* Mounting plate for switch
|
Product Reviews
| (6 Ratings, 0 Reviews) |
Average Rating:
|
|
| | |
| Create and save your own shopping list or wish list.
To use this feature you must sign in as a registered user. | |
| | |
|
|
|