Browse Categories
Browse by Manufacturer

DIY RODI KIT 3

<< Previous in Whats New Next in Whats New >>
ratingratingratingratingrating
Price: $1,999.99
Item Number: CWC-RODI-KIT-3
Manufacturer: Pure Water Power
Manufacturer Part No: CWC-RODI-KIT-3


Do It Yourself 4-Stage RODI Water Purification Kit w/12 V Pump and Variable Speed Control Box with Remote
The Pure Water Power  4-stage DIY 12 V kit allows for spot free rinse using only regular tap pressure up to 50 ft. high and beyond or with the pump on you can run 2 waterfed poles.  This kit comes with a top of the line 12V variable speed control box with manual and remote operation up to 500 ft away.  This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible.  The 4 stages of filtration are as follows:  Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0.

Variable Speed Control Box with remote operation up to 500 ft. away.   The Variable Speed Control works wonders for you.  Since most pumps are on full speed or off this variable speed control box will allow you to fine tune your water flow thus saving the lifespan of your DI filter.  Most of the time a pump which is on high power is actually overkill for waterfed cleaning.   Now you have control.  This box comes with a remote control that allows you to turn on or off the pump completely and adjust water flow up to 500 ft. away.  You can control the power at the box as well. 

Pure Water Output
Tap Pressure Only (Pump Off)         (@ 60 psi:  .9 gpm)      (@ 50 psi:  .75 gpm)
With Pump On plus tap pressure      2.1 gpm
Drawing from Buffer Tank:                1.8 gpm


This gives you 100%  pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change.  This Pure Water Power RODI System produces .75 gpm minute at heights up to 50 ft with normal incoming pressure of 50 psi from the water source. 

This kit is for those of you who prefer to implement the components needed for pure water cleaning into your vehicle without having to spend the money on a cart or rack.  This systems includes all filters and housings and includes 1/2" tubing to connect all filters inline with push fitting easy release fittings.   Just set it up and cut the hoses to length.   Assembles easily.

Kit Includes:
* 40-Inch Stainless Steel RO Housing
* 10" x 4.5" DI Housing
* (2) 2.5" x 10" Carbon & Sediment Housings
* Sediment Filter
* CTO + long life Carbon Filter
* DI Filter
* HF5 Ultra High Flow 40" x 4" RO Membrane
* RO Housing Installation Clamps
* Flush Valve Assembly
* Hand Held TDS Meter
* 50 ft. 1/2 O.D. Tubing
* 12 V 5.3 gpm pump with wire leads and elbow fittings
* 12 Volt Variable Speed Control Box with remote control
* Mounting plate for switch

Related Products

Little Beast Single RO 12 Volt
Price: $3,020.39
ratingratingratingratingrating
Little Beast Single RO 12 Volt
The "Little Beast" Single RO 12 volt system is revolutionizing the Industry. This powerful work horse is compact and produces up to 2.1 gallons per minute and can operate up to (2) waterfed poles.
Mamba 45 ft Kevlar WFP
Price: $1,284.40
ratingratingratingratingrating
Mamba 45 ft Kevlar WFP
Mamba 45 ft. Constructed of a superior blend of Hi mod Carbon Fiber and Kevlar. HIMOD (Himodulous) Carbon Fiber offers superior rigidity and strength incorporated with a cross weave pattern with Kevlar giving you a very durable and rigid finish.
Mamba 65 ft Kevlar WFP
Price: $2,054.26
ratingratingratingratingrating
Mamba 65 ft Kevlar WFP
Mamba 65 ft. Constructed of a superior blend of Hi mod Carbon Fiber and Kevlar. HIMOD (Himodulous) Carbon Fiber offers superior rigidity and strength incorporated with a cross weave pattern with Kevlar giving you a very durable and rigid finish.
DI Resin Virgin 1 Cubic Ft
Price: $247.50
ratingratingratingratingrating
DI Resin Virgin 1 Cubic Ft
High Quality Virgin Resin. This resin is of the highest quality resin available on the market today. It is specially formulated to react with all types of solids and is specifically formatted to work with 4-stage RODI systems.

Product Reviews

Rate This Product:
or Create a Review
(11 Ratings, 0 Reviews) Average Rating:
ratingratingratingratingrating
Shopping Cart
Your cart is empty.
Search Shopping Lists
Create and save your own shopping list or wish list.
To use this feature you must sign in as a registered user.